Details

---

BUY ADC-ET10BC https://www.utsource.net/itm/p/12591933.html

Parameter	Description	Value
Part Number	Analog-to-Digital Converter	ADC-ET10BC
Resolution	Bit resolution of the ADC	10 bits
Conversion Time	Time taken for one conversion	10 渭s
Input Voltage	Range of input voltage that can be converted	0 to 5V
Reference Voltage	Voltage used as a reference for conversion	Internal 2.5V
Interface Type	Communication interface type	SPI
Operating Voltage	Supply voltage range	2.7V to 5.5V
Operating Temp	Temperature range for operation	-40掳C to +85掳C
Package Type	Physical package	TSSOP-16

Instructions:

1. Power Supply: Connect the operating voltage (2.7V to 5.5V) to the VDD pin and GND to the ground pin.
2. Reference Voltage: Ensure the internal reference voltage is stable before performing conversions.
3. Input Signal: Apply the analog signal to be converted within the 0 to 5V range to the input pins.
4. SPI Configuration: Configure the SPI interface with appropriate settings (Clock polarity, phase, etc.) according to your microcontroller or processor.
5. Conversion Start: Initiate a conversion by sending the correct command sequence via SPI.
6. Reading Data: After the conversion time (10 渭s), read the digital output from the SPI data lines.
7. Temperature Considerations: Ensure the device operates within the specified temperature range (-40掳C to +85掳C) for reliable performance.
8. Handling Care: Follow standard ESD precautions when handling the ADC-ET10BC to prevent damage.

(For reference only)