Details

---

BUY CS4585E0 https://www.utsource.net/itm/p/12591995.html

Below is the parameter table and instructions for the CS4585E0:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Test Conditions
Supply Voltage	VDD	2.7	3.3	5.5	V	-
Output Voltage Range	VOUT	0	3.3	5.5	V	-
Output Current	IOUT	-	100	150	mA	-
Power Consumption	ICC	-	0.5	1.0	mA	VDD = 3.3V, No Load
Output Impedance	ZOUT	-	0.1	0.2	惟	f = 1kHz
Signal-to-Noise Ratio (SNR)	SNR	-	90	95	dB	A-weighted, VDD = 3.3V
Total Harmonic Distortion + Noise (THD+N)	THD+N	-	0.01	0.1	%	1kHz, VOUT = 1Vrms
Quiescent Current	IQ	-	0.1	0.2	mA	VDD = 3.3V, No Load
Operating Temperature	Toper	-40	25	85	掳C	-
Storage Temperature	Tstg	-65	-	150	掳C	-

Instructions

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Output Configuration:

   • The output voltage (VOUT) can be set between 0V and the supply voltage (VDD).
   • Connect the load to the output pins, ensuring the current does not exceed 150mA.

3. Power Consumption:

   • The typical power consumption is 0.5mA at 3.3V with no load. Monitor the power consumption under actual operating conditions to ensure it stays within acceptable limits.

4. Signal Quality:

   • The signal-to-noise ratio (SNR) is typically 90dB, providing a clear audio signal.
   • The total harmonic distortion plus noise (THD+N) is less than 0.1% at 1kHz, ensuring high-quality audio output.

5. Thermal Management:

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device is used within this range to prevent damage.
   • The storage temperature range is from -65掳C to 150掳C. Store the device in a suitable environment to avoid thermal stress.

6. Quiescent Current:

   • The quiescent current (IQ) is typically 0.1mA at 3.3V with no load. This low current draw helps in battery-powered applications.

7. Output Impedance:

   • The output impedance (ZOUT) is typically 0.1惟 at 1kHz, making it suitable for driving various loads.

8. Testing and Verification:

   • Verify the parameters under the specified test conditions to ensure the device meets the performance specifications.
   • Use appropriate test equipment and methods to measure parameters such as SNR, THD+N, and output impedance.

By following these instructions, you can ensure optimal performance and reliability of the CS4585E0 in your application.

(For reference only)