Details

---

BUY NE76184A-T1 https://www.utsource.net/itm/p/12592036.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Output Current (per channel)	Iout	-	20	-	mA
Operating Temperature	Temp	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Input Voltage Range	Vin	0	-	5.5	V
Propagation Delay Time	tpd	-	10	-	ns
Power Dissipation	Pd	-	250	-	mW
Quiescent Current	Iq	-	0.1	-	mA

Instructions for NE76184A-T1

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Output Current:

   • The maximum output current per channel is 20mA. Do not exceed this limit to prevent overheating or damage.

3. Operating Temperature:

   • The device operates reliably between -40掳C and 85掳C. Avoid exposing the device to temperatures outside this range.

4. Storage Temperature:

   • Store the device in an environment where the temperature ranges from -65掳C to 150掳C.

5. Input Voltage Range:

   • The input voltage should be within 0V to 5.5V to ensure proper operation and prevent damage.

6. Propagation Delay Time:

   • The typical propagation delay time is 10ns. This is important for timing considerations in your circuit design.

7. Power Dissipation:

   • The maximum power dissipation is 250mW. Ensure adequate heat dissipation if operating near this limit.

8. Quiescent Current:

   • The quiescent current is typically 0.1mA. This is the current consumed by the device when it is not actively driving any load.

Additional Notes:

• Always use appropriate decoupling capacitors (e.g., 0.1渭F ceramic) close to the power pins to filter out noise and ensure stable operation.
• When handling the device, follow ESD (Electrostatic Discharge) precautions to avoid damaging the sensitive components.
• Refer to the datasheet for detailed pin configurations and specific application circuits.

(For reference only)