Details

---

BUY TLP250F https://www.utsource.net/itm/p/12592038.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating range	4.5		20	V
Output High-Level Voltage	VOH	IO = -1mA, VCC = 5V		4.5		V
Output Low-Level Voltage	VOL	IO = 16mA, VCC = 5V		0.4		V
Input Current	IIH	VI = VCC, VO = VCC/2		1.2		mA
Input Current	IIL	VI = 0V, VO = VCC/2		-0.1		mA
Propagation Delay Time	tPD	VCC = 5V, TA = 25掳C		30		ns
Rise Time	tr	VCC = 5V, TA = 25掳C		15		ns
Fall Time	tf	VCC = 5V, TA = 25掳C		15		ns
Storage Temperature	Tstg	Operating range	-40		85	掳C
Operating Temperature	Topr	Operating range	0		70	掳C

Instructions for TLP250F

1. Power Supply Connection:

   • Connect the VCC pin to the positive supply voltage within the operating range of 4.5V to 20V.
   • Connect the GND pin to the common ground.

2. Input Signal Handling:

   • Ensure that the input current (IIH and IIL) does not exceed the specified limits to avoid damage to the device.
   • Apply the input signal within the recommended voltage levels to ensure proper operation.

3. Output Signal Handling:

   • The output high-level voltage (VOH) should be monitored when driving loads to ensure it remains within the specified limit.
   • Similarly, the output low-level voltage (VOL) should be checked to prevent excessive voltage drops under load conditions.

4. Timing Considerations:

   • Account for propagation delay (tPD), rise time (tr), and fall time (tf) in your design to ensure timing compatibility with other components in the circuit.

5. Temperature Management:

   • Operate the device within the specified temperature ranges (Tstg and Topr) to maintain reliability and performance.
   • Avoid exposing the device to temperatures outside these ranges to prevent potential failure or reduced lifespan.

6. Handling Precautions:

   • Handle the TLP250F with care to avoid electrostatic discharge (ESD) which can damage sensitive components.
   • Follow proper soldering techniques and use appropriate tools to mount the device on a PCB.

(For reference only)