Details

---

BUY SGM8922AYS8/TR https://www.utsource.net/itm/p/12592041.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VDD	1.7	-	5.5	V
Quiescent Current (VDD = 5V)	IQ	-	0.8	-	mA
Output Voltage Swing	VOS	-	0.05	-	V	@ VDD = 5V, RL = 1k惟
Input Offset Voltage	VIO	-0.5	-	0.5	mV
Input Bias Current	IIB	-	1	-	nA
Slew Rate	SR	-	3	-	V/渭s
Gain Bandwidth Product	GBP	-	1.6	-	MHz
Common Mode Input Range	VICR	-0.3	-	5.3	V	@ VDD = 5V
Output Current Limit	IOL	-	25	-	mA	Short circuit protection
Operating Temperature	TOPR	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Using SGM8922AYS8/TR

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Input Configuration:

   • Connect the input signals to the non-inverting (IN+) and inverting (IN-) inputs.
   • Ensure the common mode input range is between -0.3V and 5.3V when VDD is 5V.

3. Output Configuration:

   • Connect the load resistor (RL) to the output pin (OUT).
   • The output voltage swing can reach close to the supply rails, but ensure the load does not exceed the output current limit of 25mA.

4. Biasing and Feedback:

   • Use appropriate biasing and feedback networks to achieve the desired gain and stability.
   • For unity gain applications, connect the output directly to the inverting input.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high temperatures or under high load conditions.
   • The operating temperature range is from -40掳C to 85掳C, and the storage temperature range is from -65掳C to 150掳C.

6. Protection:

   • The device includes short circuit protection, but avoid prolonged short circuits to prevent damage.
   • Use external components like diodes and resistors for additional protection if necessary.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

8. Testing:

   • Before final assembly, test the device using the specified test conditions to ensure it meets the required performance parameters.

By following these instructions, you can ensure optimal performance and reliability of the SGM8922AYS8/TR operational amplifier.

(For reference only)