Details

---

BUY MPX2010DP https://www.utsource.net/itm/p/12592047.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	4.5	-	5.5	V
Differential Pressure	DP	Measurement Range	0	-	10	psi
Output Voltage (Min)	VOUT	DP = 0 psi, TA = 25掳C	0.2	-	0.8	V
Output Voltage (Max)	VOUT	DP = 10 psi, TA = 25掳C	4.7	-	4.9	V
Linearity Error		DP = 0 to 10 psi	-	卤1.5	-	% FS
Hysteresis Error		DP = 0 to 10 psi	-	卤0.5	-	% FS
Temperature Coefficient		DP = 0 to 10 psi	-	卤0.03	-	%/掳C
Supply Current	IDD	Operating	-	6	-	mA
Operating Temperature	TA		-40	-	125	掳C

Instructions for MPX2010DP

1. Power Supply:

   • Connect the supply voltage (VDD) between 4.5V and 5.5V to ensure stable operation.

2. Differential Pressure Input:

   • Apply differential pressure within the range of 0 to 10 psi for accurate measurements.

3. Output Signal:

   • The output voltage (VOUT) will vary from approximately 0.2V at 0 psi to 4.9V at 10 psi under standard conditions (TA = 25掳C).

4. Error Considerations:

   • Account for linearity error up to 卤1.5% FS and hysteresis error up to 卤0.5% FS in your design.

5. Temperature Effects:

   • Be aware of the temperature coefficient affecting the output by 卤0.03%/掳C.

6. Current Consumption:

   • The device typically consumes around 6mA of current.

7. Temperature Range:

   • Ensure the operating temperature is between -40掳C and 125掳C for reliable performance.

For detailed specifications and further information, refer to the official datasheet provided by the manufacturer.

(For reference only)