Details

---

BUY BD9596MWV https://www.utsource.net/itm/p/12592062.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	2.5	-	5.5	V
Output Voltage	VOUT	Fixed	-	3.3	-	V
Output Current	IOUT	Continuous	-	1.5	-	A
Quiescent Current	IQ	VIN = 5V, VOUT = 3.3V	-	2.5	-	μA
Dropout Voltage	VDROPOUT	IOUT = 1.5A	-	0.3	-	V
PSRR (Power Supply Rejection Ratio)	PSRR	f = 1kHz, VIN = 5V, VOUT = 3.3V	-	70	-	dB
Operating Temperature	TOPR	Junction	-40	-	85	°C
Storage Temperature	TSTG		-40	-	85	°C

Instructions for BD9596MWV

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.5V to 5.5V to avoid damage or malfunction.

2. Output Voltage (VOUT):

   • The output voltage is fixed at 3.3V. No external components are required to set this voltage.

3. Output Current (IOUT):

   • The regulator can supply up to 1.5A continuously. Ensure that the load does not exceed this limit to prevent overheating and potential failure.

4. Quiescent Current (IQ):

   • The quiescent current is typically 2.5μA under specified conditions. This low quiescent current makes the device suitable for battery-powered applications.

5. Dropout Voltage (VDROPOUT):

   • At full load (1.5A), the dropout voltage is approximately 0.3V. Keep the input voltage at least 0.3V higher than the output voltage for proper regulation.

6. PSRR (Power Supply Rejection Ratio):

   • The device offers a PSRR of 70dB at 1kHz, which helps in filtering out noise from the power supply.

7. Operating and Storage Temperature:

   • The operating temperature range is from -40°C to +85°C, and the storage temperature range is the same. Ensure that environmental conditions do not exceed these limits.

8. Application Considerations:

   • Use appropriate decoupling capacitors on both input and output sides to ensure stable operation and reduce ripple.
   • For optimal thermal performance, ensure adequate PCB layout with sufficient copper area for heat dissipation.

These parameters and instructions should help in effectively using the BD9596MWV in your design.

(For reference only)