Details

---

BUY ACPL-W341-500E https://www.utsource.net/itm/p/12592141.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Supply voltage for the input side
Output Voltage	VOUT	-	5.0	-	V	Nominal output voltage
Isolation Voltage	VIORM	-	-	5000	V	Maximum repetitive peak isolation voltage
Working Isolation Voltage	VIOWM	-	-	1140	V	Continuous working isolation voltage
Output Current	IOUT	-	10	20	mA	Maximum output current
Propagation Delay Time	tpd	-	1.0	1.5	渭s	Time delay from input to output
Rise Time	tr	-	0.2	0.3	渭s	Time for output to rise from 10% to 90%
Fall Time	tf	-	0.2	0.3	渭s	Time for output to fall from 90% to 10%
Operating Temperature	TA	-40	-	105	掳C	Ambient operating temperature range
Storage Temperature	TSTG	-55	-	150	掳C	Temperature range for storage
Humidity	RH	-	-	95	%	Relative humidity, non-condensing
Input Capacitance	CIN	-	60	-	pF	Capacitance at input pins
Output Capacitance	COUT	-	10	-	pF	Capacitance at output pins
Common Mode Transient Immunity	CMII	-	25	-	kV/渭s	Ability to withstand rapid changes in common mode voltage

Instructions:

1. Supply Voltage (V_IN): Ensure the input voltage is within the specified range (2.7V to 5.5V) to avoid damage to the device.
2. Output Voltage (V_OUT): The nominal output voltage is 5.0V. Use appropriate load resistors to ensure the output current does not exceed the maximum rating.
3. Isolation Voltage: The device provides up to 5000V of isolation voltage. Ensure that the working isolation voltage does not exceed 1140V to prevent breakdown.
4. Output Current (I_OUT): The maximum output current is 20mA. Exceeding this can cause overheating and potential failure.
5. Temperature Range: Operate the device within the ambient temperature range of -40掳C to 105掳C and store it between -55掳C and 150掳C.
6. Humidity: The device should be used in environments with relative humidity up to 95%, non-condensing.
7. Capacitance: Be aware of the input and output capacitance values when designing your circuit to avoid signal distortion.
8. Common Mode Transient Immunity (CMII): The device can handle common mode transients up to 25kV/渭s. Design your circuit to minimize such transients if possible.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)