Details

---

BUY TIC106M https://www.utsource.net/itm/p/12592154.html

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Off-State Voltage	VDRM	600	V
Maximum Repetitive Peak On-State Current (rms)	IT(RMS)	10	A
Maximum Non-Repetitive Peak On-State Current	ITSM	50	A
Gate Trigger Current	IGT	20	mA
Holding Current	IH	5	mA
Junction Temperature Range	TJ	-40 to +125	掳C
Storage Temperature Range	TSTG	-65 to +150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage junction temperature.
   • Handle with care to avoid mechanical stress and damage.

2. Electrical Connections:

   • Connect the gate terminal to the control circuit using a short, low-inductance lead.
   • Ensure all connections are secure and free from corrosion.

3. Gate Drive:

   • Apply a gate trigger current (I_GT) of at least 20 mA to turn on the device.
   • Maintain the holding current (I_H) of at least 5 mA to keep the device on.

4. Overcurrent Protection:

   • Implement overcurrent protection to prevent exceeding the maximum non-repetitive peak on-state current (I_TSM) of 50 A.

5. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it remains within the -40掳C to +125掳C range.
   • Use appropriate cooling methods such as heatsinks or forced air cooling.

6. Storage:

   • Store the device in a dry, cool place with temperatures between -65掳C and +150掳C.

7. Testing:

   • Perform initial testing under controlled conditions to verify correct operation.
   • Regularly inspect the device for signs of wear or damage.

8. Compliance:

   • Ensure compliance with relevant safety and regulatory standards for your application.

(For reference only)