Details

---

BUY SDA004 https://www.utsource.net/itm/p/12592190.html

Parameter	Description	Value
Part Number	Component Identifier	SDA004
Type	Device Type	Diode
Package	Package Type	SOD-323
Forward Voltage (Vf)	Forward Voltage at Rated Current	0.7 V @ 100 mA
Reverse Voltage (Vr)	Maximum Reverse Voltage	50 V
Peak Reverse Current (Irm)	Peak Reverse Current	5 渭A @ 25掳C
Continuous Reverse Current (Ir)	Continuous Reverse Current	1 渭A @ 25掳C
Forward Current (If)	Maximum Forward Current	150 mA
Power Dissipation (Ptot)	Total Power Dissipation	150 mW
Operating Temperature (Tj)	Junction Operating Temperature Range	-65掳C to +150掳C
Storage Temperature (Ts)	Storage Temperature Range	-65掳C to +150掳C
Thermal Resistance (RthJA)	Thermal Resistance, Junction to Ambient	350 掳C/W
Capacitance (Ct)	Capacitance at Zero Bias	4 pF
Mounting Type	Mounting Method	Surface Mount

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent damage from static electricity.

2. Soldering:

   • Preheat the PCB to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature setting between 260掳C and 300掳C.
   • Ensure the soldering process is completed within 10 seconds.
   • Allow the component to cool naturally after soldering.

3. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive gases or chemicals.

4. Electrical Connections:

   • Ensure correct polarity when connecting the diode.
   • Do not exceed the maximum ratings specified in the table.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum power dissipation.
   • Consider using a heatsink if necessary.

6. Testing:

   • Use a multimeter to check for continuity and reverse bias characteristics.
   • Ensure the diode is not damaged during testing by avoiding excessive current or voltage.

7. Environmental Considerations:

   • The component is RoHS compliant and suitable for use in environmentally conscious designs.
   • Follow local regulations for disposal and recycling.

(For reference only)