Details

---

BUY KE924505 https://www.utsource.net/itm/p/12592203.html

Parameter	Description	Value
Part Number	KE924505	-
Type	MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor)	-
Package	TO-220	-
Polarity	N-Channel	-
VDS (Drain-Source Voltage)	Maximum Drain-Source Voltage	60V
VGS (Gate-Source Voltage)	Maximum Gate-Source Voltage	卤20V
ID (Continuous Drain Current)	Continuous Drain Current at 25掳C	10A
ID (Pulsed Drain Current)	Pulsed Drain Current (t = 10渭s)	50A
RDS(on) (On-State Resistance)	On-State Resistance at VGS = 10V	10m惟
Power Dissipation (PD)	Maximum Power Dissipation at 25掳C	75W
Operating Temperature Range	Junction Temperature Range	-55掳C to +150掳C
Storage Temperature Range	Storage Temperature Range	-65掳C to +150掳C
Thermal Resistance (R胃JC)	Junction to Case Thermal Resistance	1.5掳C/W
Thermal Resistance (R胃JA)	Junction to Ambient Thermal Resistance	62.5掳C/W

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle the device with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply a suitable thermal compound between the device and the heat sink to improve thermal conductivity.
   • Tighten the mounting screws to the recommended torque value to ensure good thermal contact without causing mechanical stress.

3. Biasing and Operation:

   • Apply the gate voltage (VGS) within the specified range to avoid damaging the device.
   • Ensure that the drain-source voltage (VDS) does not exceed the maximum rating.
   • Keep the operating temperature within the specified range to prevent thermal runaway.

4. Testing:

   • Use a multimeter or an oscilloscope to verify the correct operation of the device.
   • Test the device under controlled conditions to ensure it meets the performance specifications.

5. Safety Precautions:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Ensure proper ventilation if the device is operated at high power levels.
   • Follow all relevant safety guidelines and regulations when using the device in your application.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)