Details

---

BUY IR2113 https://www.utsource.net/itm/p/12593254.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	VCC	10	-	20	V	-
High-Side Floating Voltage	VBOOT	-	-	600	V	-
Low-Side Input Threshold (High)	VIL(L)	-	1.4	2.0	V	-
Low-Side Input Threshold (Low)	VIH(L)	3.5	4.0	-	V	-
High-Side Input Threshold (High)	VIL(H)	-	1.4	2.0	V	-
High-Side Input Threshold (Low)	VIH(H)	3.5	4.0	-	V	-
Output Source Current	IOUT(S)	-	1.1	-	A	-
Output Sink Current	IOUT(K)	-	1.9	-	A	-
Propagation Delay	td	-	80	150	ns	-
Rise Time	tr	-	35	70	ns	-
Fall Time	tf	-	35	70	ns	-
Operating Temperature	TA	-40	-	125	掳C	-
Storage Temperature	TSTG	-55	-	150	掳C	-

Instructions for Using the IR2113

1. Power Supply:

   • Ensure that the supply voltage (V_CC) is within the range of 10V to 20V.
   • The high-side floating voltage (V_BOOT) should not exceed 600V.

2. Input Signals:

   • For low-side inputs, the logic high threshold (V_IH(L)) is typically 4.0V, and the logic low threshold (V_IL(L)) is 1.4V.
   • For high-side inputs, the logic high threshold (V_IH(H)) is also 4.0V, and the logic low threshold (V_IL(H)) is 1.4V.

3. Output Current:

   • The output source current (I_OUT(S)) is typically 1.1A.
   • The output sink current (I_OUT(K)) is typically 1.9A.

4. Timing Parameters:

   • The propagation delay (t_d) is typically 80ns with a maximum of 150ns.
   • The rise time (t_r) and fall time (t_f) are both typically 35ns with a maximum of 70ns.

5. Temperature Considerations:

   • The operating temperature range (T_A) is from -40掳C to 125掳C.
   • The storage temperature range (T_STG) is from -55掳C to 150掳C.

6. Bootstrapping:

   • For high-side operation, use a bootstrap capacitor to provide the necessary floating supply voltage (V_BOOT).

7. Protection:

   • Ensure proper decoupling capacitors are used to stabilize the power supply and reduce noise.
   • Implement appropriate protection circuits to prevent overvoltage and overcurrent conditions.

8. Layout:

   • Use short, wide traces for power and ground connections to minimize inductance and improve performance.
   • Keep input signals away from noisy areas to avoid false triggering.

By following these guidelines, you can ensure reliable and efficient operation of the IR2113 in your circuit design.

(For reference only)