Details

---

BUY DZ2S180C0L https://www.utsource.net/itm/p/12593255.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	DZ2S180C0L	-
Type	Device Type	Zener Diode	-
Voltage (Vz)	Zener Voltage at specified test current	18.0	V
Power Dissipation	Maximum Power Dissipation	500	mW
Current (Iz)	Zener Test Current	5	mA
Reverse Current	Maximum Reverse Current at Vr	1	μA
Operating Temp.	Operating Temperature Range	-55 to +175	°C
Package	Package Type	SOD-323	-

Instructions for Use:

1. Mounting and Handling:

   • Handle with care to avoid damage to the leads or body.
   • Ensure correct orientation during mounting to prevent short circuits.

2. Soldering:

   • Use a temperature-controlled soldering iron not exceeding 300°C.
   • Limit soldering time to less than 10 seconds per operation.
   • Allow adequate cooling after soldering.

3. Electrical Connections:

   • Connect the diode in the circuit according to the polarity indicated on the component.
   • Ensure that the maximum ratings are not exceeded, particularly the power dissipation and reverse voltage limits.

4. Storage:

   • Store in a dry environment away from direct sunlight.
   • Keep components in original packaging until ready for use to minimize static damage.

5. Testing:

   • Before installing, verify the Zener voltage using a suitable tester.
   • Check for any leakage currents which could indicate a faulty component.

6. Safety Precautions:

   • Always refer to the datasheet for detailed specifications and safety guidelines.
   • Use appropriate protective equipment when handling electrical components.

(For reference only)