Details

---

BUY TMS9900NL https://www.utsource.net/itm/p/12593273.html

Parameter	Description
Device Type	Microprocessor
Manufacturer	Texas Instruments
Part Number	TMS9900NL
Package Type	Ceramic DIP (Dual Inline Package)
Pin Count	40
Clock Frequency	Up to 3 MHz
Supply Voltage (Vcc)	5V
Operating Temperature	-40掳C to +85掳C
Data Bus Width	16-bit
Address Bus Width	15-bit (provides access to 32KB of memory)
Instruction Set	CISC (Complex Instruction Set Computing)
Features	On-chip register file, separate data and address buses

Instructions for Use

1. Power Supply Connection

   • Connect Vcc to +5V.
   • Connect ground (GND) pins to the system ground.

2. Clock Signal

   • Provide a clock signal up to 3 MHz to the CLK pin.

3. Reset Pin (RESET)

   • Ensure the reset pin is properly pulled low during power-up or reset conditions.

4. Bus Configuration

   • Configure the data bus (D0-D15) and address bus (A0-A15) according to your system design requirements.

5. Program Loading

   • Load the program into memory connected to the address and data buses.

6. Interrupt Handling

   • Manage interrupts by connecting appropriate signals to the interrupt request (INT) pin.

7. Heat Dissipation

   • Ensure adequate heat dissipation, especially if operating at higher frequencies or in high-temperature environments.

8. Storage and Handling

   • Store and handle the TMS9900NL in accordance with ESD (Electrostatic Discharge) protection guidelines.

For detailed specifications and advanced configurations, refer to the official Texas Instruments datasheet for the TMS9900NL.

(For reference only)