Details

---

BUY TDA8950TH/N1,118 HSSOP-24 https://www.utsource.net/itm/p/12593407.html

Parameter	Description	Value	Unit
Package	Type	HSSOP-24	-
Part Number	Identifier	TDA8950TH/N1,118	-
Supply Voltage	VCC Operating Range	4.5 to 18	V
Quiescent Current	IQ (Typical)	2.5	mA
Output Power	Continuous Average Power	50	W
Frequency Response	Audio Bandwidth	20 Hz to 20 kHz	-
Signal-to-Noise Ratio	SNR (A-weighted)	100	dB
Total Harmonic Distortion	THD+N (Typical)	0.01	%
Protection Features	Overcurrent Protection	Yes	-
Protection Features	Thermal Shutdown	Yes	-
Operating Temperature Range	TJ	-40 to 125	°C

Instructions for Use:

1. Power Supply Requirements:

   • Ensure the supply voltage is within the specified range of 4.5V to 18V.
   • Use a power source capable of delivering sufficient current to support the maximum output power.

2. Installation:

   • Mount the TDA8950TH/N1,118 on a suitable PCB with proper heat dissipation mechanisms if operating at high power levels.
   • Follow the recommended layout guidelines provided in the datasheet for optimal performance and thermal management.

3. Connections:

   • Connect the input signals to the designated pins, ensuring signal integrity.
   • Verify all connections, especially grounding, to avoid noise and interference.

4. Protection:

   • Utilize the built-in overcurrent and thermal protection features but also consider external components like fuses for additional safety.

5. Testing:

   • Before full operation, perform initial testing at lower power levels to ensure correct functionality.
   • Gradually increase power while monitoring temperature and performance parameters.

6. Maintenance:

   • Regularly check for any signs of overheating or unusual behavior.
   • Keep the device clean and free from contaminants that could affect performance.

(For reference only)