Details

---

BUY MX29F001BQC-90 https://www.utsource.net/itm/p/12593421.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	2.7	-	3.6	V
Standby Current	Icc	-	10	50	μA	@ Vcc = 3.0V, Ta = 25°C
Active Current	Icc	-	20	100	mA	@ Vcc = 3.0V, Ta = 25°C
Access Time	tACC	70	-	90	ns	@ Vcc = 3.0V, Ta = 25°C
Cycle Time	tCYC	140	-	180	ns	@ Vcc = 3.0V, Ta = 25°C
Output High Voltage	VOH	2.4	-	Vcc-0.4	V	@ IOL = -4mA, Ta = 25°C
Output Low Voltage	VOL	0	-	0.4	V	@ IOH = 4mA, Ta = 25°C
Input High Voltage	VIH	2.0	-	Vcc	V
Input Low Voltage	VIL	0	-	0.8	V
Storage Temperature	Tstg	-65	-	150	°C
Operating Temperature	Topr	-40	-	85	°C
Programming Voltage	Vpp	12	-	13.5	V
Programming Current	Ipp	-	25	50	mA
Erase Voltage	Verase	12	-	13.5	V
Erase Time	terase	-	5	10	s

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
   • The standby current (Icc) should be monitored to ensure it does not exceed 50μA at 3.0V.

2. Operating Conditions:

   • The device operates optimally at temperatures between -40°C and 85°C.
   • Store the device in an environment with temperatures ranging from -65°C to 150°C.

3. Programming:

   • Apply a programming voltage (Vpp) of 12V to 13.5V.
   • The programming current (Ipp) should be between 25mA and 50mA.

4. Erase:

   • Apply an erase voltage (Verase) of 12V to 13.5V.
   • The typical erase time is 5 seconds, but it can take up to 10 seconds.

5. Timing Parameters:

   • Ensure the access time (tACC) is within 70ns to 90ns.
   • The cycle time (tCYC) should be between 140ns and 180ns.

6. Input/Output Levels:

   • Verify that the input high voltage (VIH) is at least 2.0V and the input low voltage (VIL) is no more than 0.8V.
   • The output high voltage (VOH) should be at least 2.4V, and the output low voltage (VOL) should be no more than 0.4V.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow proper soldering techniques to prevent thermal stress.

For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)