Details

---

BUY TEA1716T https://www.utsource.net/itm/p/12593499.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	100	230	265	VAC	Operating input voltage range
Output Voltage	VOUT	-	5	-	VDC	Regulated output voltage
Output Current	IOUT	-	1	1.5	A	Maximum continuous output current
Efficiency	畏	-	85	90	%	Typical efficiency at full load
Switching Frequency	fSW	50	65	-	kHz	Operating switching frequency
Standby Power Consumption	PSTBY	-	0.5	1	W	Power consumption in standby mode
Protection Features	-	-	-	-	-	Overvoltage, overcurrent, short-circuit protection
Operating Temperature	TOP	-40	25	85	掳C	Operating temperature range
Storage Temperature	TSTG	-55	-	125	掳C	Storage temperature range
Humidity	RH	-	-	95	%	Relative humidity, non-condensing

Instructions for Use

1. Power Supply Connection:

   • Connect the input power to the designated pins of the TEA1716T. Ensure the input voltage is within the specified range (100VAC to 265VAC).

2. Output Configuration:

   • The output voltage is typically 5VDC. Verify that the output voltage meets your application requirements.

3. Load Connection:

   • Connect the load to the output terminals of the TEA1716T. The maximum continuous output current is 1.5A.

4. Efficiency Considerations:

   • The typical efficiency of the TEA1716T is between 85% and 90%. Optimize the design to minimize losses and improve efficiency.

5. Switching Frequency:

   • The switching frequency ranges from 50kHz to 65kHz. This helps in reducing electromagnetic interference (EMI) and improving performance.

6. Standby Mode:

   • When the device is in standby mode, the power consumption should not exceed 1W. Ensure proper management of standby power to comply with energy standards.

7. Protection Features:

   • The TEA1716T includes overvoltage, overcurrent, and short-circuit protection. These features help protect the device and connected components from damage.

8. Temperature Management:

   • Operate the device within the specified temperature range (-40掳C to 85掳C). For storage, ensure temperatures do not exceed -55掳C to 125掳C.

9. Humidity Considerations:

   • Store and operate the device in environments with relative humidity up to 95%, ensuring no condensation occurs.

10. Mounting and Layout:

    • Follow recommended PCB layout guidelines to ensure optimal thermal performance and minimize EMI. Use appropriate heat sinks if necessary.

11. Testing and Validation:

    • Perform thorough testing under various operating conditions to ensure the device meets all performance and safety requirements.

(For reference only)