Details

---

BUY MC68HC705P6CP https://www.utsource.net/itm/p/12593509.html

Parameter	Description	Min	Typ	Max	Unit
VCC	Supply Voltage	4.75	5.0	5.25	V
ICC	Supply Current (Active Mode)	-	10	-	mA
ICC (Standby)	Supply Current (Standby Mode)	-	0.1	-	mA
fCLK	Clock Frequency	0	4	10	MHz
Ta	Operating Temperature Range	-40	-	85	掳C
Tstg	Storage Temperature Range	-65	-	150	掳C
tpd	Propagation Delay Time	-	250	-	ns
tphl	High to Low Output Transition Time	-	20	-	ns
tplh	Low to High Output Transition Time	-	20	-	ns
VIH	Input High Voltage	2.0	-	5.25	V
VIL	Input Low Voltage	0	-	0.8	V
VOH	Output High Voltage	2.4	-	5.0	V
VOL	Output Low Voltage	0	-	0.4	V

Instructions for Using the MC68HC705P6CP

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Use a stable power source to avoid voltage fluctuations.

2. Clock Configuration:

   • The clock frequency can be set between 0 MHz and 10 MHz. For optimal performance, use a crystal oscillator or a stable clock source.
   • For frequencies above 4 MHz, ensure that the power supply and ground connections are well decoupled with capacitors close to the device.

3. Operating Temperature:

   • The device is designed to operate within the temperature range of -40掳C to 85掳C. Avoid exposing the device to temperatures outside this range to prevent damage.

4. Standby Mode:

   • To enter standby mode, set the appropriate control pin to the specified level (usually low). The supply current will drop to approximately 0.1 mA in this mode.

5. Input/Output Levels:

   • Ensure that input signals meet the required high (V_IH) and low (V_IL) voltage levels.
   • Outputs will provide the specified high (V_OH) and low (V_OL) voltage levels.

6. Propagation Delay:

   • The propagation delay time (t_pd) is typically 250 ns. This should be considered when designing timing-sensitive applications.

7. Storage Temperature:

   • Store the device in a temperature range of -65掳C to 150掳C to ensure long-term reliability.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper soldering techniques to avoid thermal shock and mechanical stress during assembly.

9. Testing and Debugging:

   • Use a logic analyzer or oscilloscope to verify the correct operation of the device.
   • Check for any short circuits or open circuits in the power and signal lines.

By following these guidelines, you can ensure reliable and efficient operation of the MC68HC705P6CP microcontroller.

(For reference only)