Details

---

BUY S3P9428XZZ-AVB8 https://www.utsource.net/itm/p/12593563.html

Parameter	Description	Value	Unit
Part Number	Full part identifier	S3P9428XZZ-AVB8	-
Package Type	Encapsulation type	SOP-8	-
Operating Voltage	Supply voltage range	2.7 to 5.5	V
Operating Current	Maximum operating current	100	mA
Output Configuration	Output structure	Push-pull	-
Logic Level (High)	Input voltage for logic high	Vcc - 0.4	V
Logic Level (Low)	Input voltage for logic low	0.4	V
Propagation Delay Time	Time delay between input and output	6.5 (typical)	ns
Power Dissipation	Maximum power dissipation	200	mW
Operating Temperature	Temperature range for operation	-40 to +85	掳C
Storage Temperature	Temperature range for storage	-65 to +150	掳C
Mounting Type	Method of attachment	Surface mount	-

Instructions:

1. Power Supply Connection: Ensure the supply voltage is within the specified range (2.7V to 5.5V). Connect the Vcc pin to the positive supply and GND pin to the ground.

2. Input Signal Handling: Apply input signals ensuring they meet the logic level requirements: High should be above Vcc - 0.4V, Low should be below 0.4V.

3. Thermal Management: Monitor the device temperature to ensure it stays within the operating temperature range (-40掳C to +85掳C). Use appropriate heat sinking if necessary.

4. Electrostatic Discharge (ESD) Protection: Handle the component with care to avoid ESD damage. Follow standard ESD handling procedures.

5. Mounting: During soldering or mounting, ensure the temperature does not exceed the storage temperature limits to prevent damage.

6. Signal Integrity: To maintain signal integrity, especially at higher frequencies, use proper PCB layout practices including controlled impedance traces and decoupling capacitors near the power pins.

7. Testing: After assembly, verify the functionality by testing the propagation delay and output configuration under typical operating conditions.

(For reference only)