Details

---

BUY MAX4644EUT https://www.utsource.net/itm/p/12593568.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	-	5.5	V
Output Current per Channel	IOUT	Continuous, per channel	-	100	-	mA
Quiescent Current	IQ	VDD = 5V	-	40	-	渭A
Shutdown Current	ISD	VSD = VDD	-	0.1	-	渭A
Output Voltage Drop	VDROPOUT	IOUT = 100mA	-	200	-	mV
Input Voltage Range	VIN	Operating	2.7	-	5.5	V
Operating Temperature	TOPR	-	-40	-	85	掳C

Instructions for MAX4644EUT:

1. Power Supply Connection:

   • Connect the supply voltage (VDD) between 2.7V and 5.5V to the appropriate pin.
   • Ensure proper bypass capacitors are placed close to the power pins for stability.

2. Output Configuration:

   • The device can drive up to 100mA per output channel continuously.
   • Check the output voltage drop (VDROPOUT) at maximum load conditions to ensure it meets system requirements.

3. Quiescent Current Management:

   • The quiescent current is typically 40渭A at 5V supply. Design the circuit considering this typical value for power budget calculations.

4. Shutdown Mode:

   • To minimize power consumption, use the shutdown feature by applying the supply voltage to the shutdown pin (VSD). In shutdown mode, the current drops to approximately 0.1渭A.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to +85掳C to ensure reliable performance.

6. Input Voltage Handling:

   • Ensure the input voltage stays within the specified operating range to prevent damage or erratic behavior.

7. Layout Recommendations:

   • For optimal performance, follow good PCB layout practices including short traces for high-frequency signals and adequate spacing between components to manage heat dissipation.

(For reference only)