Details

---

BUY TD6002P https://www.utsource.net/itm/p/12593569.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	2.7	-	5.5	V
Output Voltage	VOUT	Adjustable	-	-	-	V
Quiescent Current	IQ	VIN = 3V	-	10	-	渭A
Shutdown Current	ISD	VIN = 3V	-	0.1	-	渭A
Output Current Limit	ILIM	VIN = 5V, VOUT=3.3V	-	600	-	mA
Dropout Voltage	VDROPOUT	IOUT = 300mA	-	250	-	mV

Instructions for TD6002P:

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the power supply ensuring it is within the range of 2.7V to 5.5V.
   • Ensure proper decoupling capacitors are connected at both input and output for stable operation.

2. Output Voltage Setting:

   • The output voltage (VOUT) can be adjusted using external resistors. Refer to the datasheet for specific resistor values based on desired output voltage.

3. Quiescent Current:

   • Keep in mind the quiescent current of 10渭A at 3V input when designing your circuit to manage power consumption efficiently.

4. Shutdown Feature:

   • Utilize the shutdown feature to reduce power consumption by pulling the SHDN pin low, which will lower the current draw to approximately 0.1渭A.

5. Output Current Limitation:

   • Be aware that the device has an output current limit of up to 600mA under specified conditions. Ensure not to exceed this limit to avoid damaging the component.

6. Dropout Voltage Consideration:

   • At a load current of 300mA, the dropout voltage is typically around 250mV. Design your application considering this parameter to ensure efficient operation.

7. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current to prevent overheating.

8. PCB Layout:

   • Follow recommended PCB layout guidelines provided in the datasheet for optimal performance and thermal management.

(For reference only)