Details

---

BUY MBRB20200CT https://www.utsource.net/itm/p/12593625.html

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	200	V
Maximum Average Forward Rectified Output Current (Tamb = 75掳C)	IF(AV)	20	A
Maximum RMS Current (Tamb = 75掳C)	IRMS	14	A
Maximum Non-Repetitive Peak Surge Current (T = 8.3 ms Sine-Wave Half Wave)	IFSM	200	A
Maximum Operating Junction Temperature	TJ(MAX)	150	掳C
Storage Temperature Range	TSTG	-65 to 150	掳C
Forward Voltage (IF = 20A)	VF	1.1	V
Reverse Recovery Time (IF = 20A, di/dt = 100 A/渭s)	trr	120	ns

Instructions for Use:

1. Mounting:

   • Ensure proper heat dissipation by mounting the device on a suitable heatsink.
   • Use thermal compound between the device and heatsink for better thermal conductivity.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse polarity which can lead to device failure.
   • Ensure all connections are secure and free from corrosion.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table to prevent damage to the device.
   • Operate within the specified temperature range to ensure reliable performance.

4. Surge Current Handling:

   • The device is capable of handling high surge currents for short durations. Ensure that the surge current does not exceed the IFSM value and that the duration is within the specified limits.

5. Reverse Recovery:

   • Be aware of the reverse recovery time (trr) when using the device in high-frequency applications to avoid excessive power dissipation and potential overheating.

6. Storage:

   • Store the device in a dry environment within the specified storage temperature range to prevent damage.

7. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the leads.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

8. Testing:

   • When testing the device, ensure that the test conditions do not exceed the maximum ratings and that appropriate safety measures are in place.

9. Compliance:

   • Ensure that the device meets any relevant safety and compliance standards for your application.

(For reference only)