Details

---

BUY XC5210-5PQ160I https://www.utsource.net/itm/p/12593632.html

Parameter	Description	Value
Device Type	Low Power CPLD	XC5210
Package Type	Plastic Quad Flatpack (PQFP)	PQ160I
I/O Count	Number of Input/Output Pins	132
Core Voltage (Vcc)	Supply Voltage for the Core Logic	3.3V
I/O Voltage (Vccio)	Supply Voltage for I/O Buffers	3.3V / 5V
Operating Temperature	Temperature Range for Normal Operation	-40掳C to +85掳C
Configuration Memory	Non-Volatile Memory for Configuration Data	EEPROM
Configuration Modes	Methods for Loading Configuration Data	ISP (In-System Programming), JTAG, Serial, Parallel
Maximum Clock Frequency	Highest Clock Frequency for Internal Logic	100 MHz
Power Consumption	Typical Power Consumption at Maximum Clock Frequency	100 mW
Pin Pitch	Distance Between Adjacent Pins	0.5 mm
Package Size	Dimensions of the Package	24 mm x 24 mm

Instructions for Using XC5210-5PQ160I:

1. Power Supply:

   • Connect the core voltage (Vcc) to 3.3V.
   • Connect the I/O voltage (Vccio) to either 3.3V or 5V, depending on your application requirements.

2. Configuration:

   • Use ISP (In-System Programming) for programming the device in-circuit.
   • Alternatively, use JTAG, serial, or parallel programming methods as needed.
   • Ensure the configuration data is correctly loaded into the EEPROM to avoid any undefined behavior.

3. Pin Connections:

   • Refer to the pinout diagram provided in the datasheet for correct pin connections.
   • Ensure all power and ground pins are properly connected to their respective supplies and grounds.

4. Operating Conditions:

   • Operate the device within the specified temperature range (-40掳C to +85掳C) to ensure reliable performance.
   • Avoid exceeding the maximum clock frequency of 100 MHz to prevent overheating and potential damage.

5. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Store the device in anti-static packaging when not in use.

6. Testing:

   • After configuration, test the device to ensure it meets the expected performance criteria.
   • Use appropriate test vectors and debugging tools to verify functionality.

7. Documentation:

   • Refer to the detailed datasheet and application notes for more specific information and advanced usage guidelines.

(For reference only)