Details

---

BUY TLP630(GB) https://www.utsource.net/itm/p/12594103.html

Parameter	Symbol	Min	Typ	Max	Unit
Forward Voltage (IF = 10mA)	VF	-	1.2	1.6	V
Reverse Voltage	VR	-	-	5	V
Output Current	IC	-	10	15	mA
Isolation Voltage	VI	-	-	2500	Vrms
Turn-On Time (Typical)	ton	-	1	-	渭s
Turn-Off Time (Typical)	toff	-	1	-	渭s
Storage Temperature	TSTG	-40	-	100	掳C
Operating Temperature	TA	-40	-	100	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the TLP630(GB) with care to avoid mechanical stress.
   • Ensure that the device is mounted on a PCB with appropriate soldering techniques to prevent thermal damage.

2. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals to the input side of the circuit.
   • Connect the collector (C) and emitter (E) terminals to the output side of the circuit.
   • Ensure that the reverse voltage does not exceed 5V to avoid damage.

3. Forward Current:

   • The forward current (IF) should be kept within the specified range to ensure reliable operation. Exceeding the maximum forward current can cause overheating and failure.

4. Isolation Voltage:

   • The isolation voltage (VI) must not exceed 2500Vrms to maintain safe electrical isolation between the input and output sides.

5. Temperature Considerations:

   • Operate the device within the specified temperature range (-40掳C to 100掳C) to ensure optimal performance and longevity.
   • Store the device in a dry environment within the storage temperature range (-40掳C to 100掳C).

6. Timing Parameters:

   • The turn-on time (ton) and turn-off time (toff) are both typically 1 渭s. Design your circuit to accommodate these timing parameters for proper operation.

7. Safety Precautions:

   • Ensure that the device is properly insulated and grounded to prevent electrical shock.
   • Follow all relevant safety standards and guidelines when handling and using the TLP630(GB).

(For reference only)