Details

---

BUY TDC0123KM https://www.utsource.net/itm/p/12594124.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5	5.5	V	Operating supply voltage
Output Current	Iout	-	100	150	mA	Maximum output current
Operating Temperature	Temp	-40	-	85	掳C	Temperature range for operation
Storage Temperature	Tstg	-65	-	150	掳C	Temperature range for storage
Quiescent Current	Iq	1	2	3	mA	Current consumption at no load
Rise Time	Tr	-	10	20	ns	Time to reach 90% of final value
Fall Time	Tf	-	10	20	ns	Time to fall to 10% of initial value
Propagation Delay	Tpd	5	7	10	ns	Time delay from input to output
Input Voltage Range	Vin	0	-	5.5	V	Valid input voltage range
Output Voltage Swing	Vos	0.1	-	5.4	V	Output voltage swing

Instructions for TDC0123KM

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Output Current:

   • The maximum output current (Iout) is 150mA. Do not exceed this limit to prevent damage to the device.
   • For optimal performance, keep the output current around 100mA.

3. Operating Temperature:

   • The device can operate within a temperature range of -40掳C to 85掳C.
   • Avoid operating the device outside this range to ensure reliable performance.

4. Storage Temperature:

   • Store the device in a temperature range of -65掳C to 150掳C to prevent damage.

5. Quiescent Current:

   • The quiescent current (Iq) is typically 2mA. This is the current consumed by the device when there is no load.

6. Rise and Fall Time:

   • The rise time (Tr) and fall time (Tf) are both typically 10ns. These parameters indicate the speed at which the output transitions between states.

7. Propagation Delay:

   • The propagation delay (Tpd) is typically 7ns. This is the time it takes for the output to respond to a change in the input.

8. Input Voltage Range:

   • The valid input voltage range (Vin) is 0V to 5.5V. Ensure the input signal stays within this range to avoid damage or incorrect operation.

9. Output Voltage Swing:

   • The output voltage swing (Vos) is from 0.1V to 5.4V. This indicates the range over which the output voltage can vary.

10. Handling:

    • Handle the device with care to avoid static discharge, which can damage the internal components.
    • Use appropriate ESD protection measures during handling and installation.

11. Mounting:

    • Follow the recommended PCB layout guidelines to ensure proper heat dissipation and electrical performance.
    • Ensure all connections are secure and free from solder bridges or other defects.

By following these instructions, you can ensure the TDC0123KM operates reliably and efficiently in your application.

(For reference only)