Details

---

BUY SFC2815RM https://www.utsource.net/itm/p/12594125.html

Parameter	Description	Value
Part Number	Full part number of the component	SFC2815RM
Type	Type of component	Surface Mount
Package	Package type	DFN
Pins	Number of pins	8
Operating Voltage	Range of operating voltage	2.7V to 5.5V
Operating Current	Maximum operating current	300mA
Output Current	Maximum output current	150mA
Quiescent Current	Quiescent current at no load	2渭A
Shutdown Current	Shutdown current	0.1渭A
Input Capacitance	Input capacitance	10pF
Output Capacitance	Output capacitance	100nF
Operating Temperature	Operating temperature range	-40掳C to 125掳C
Storage Temperature	Storage temperature range	-65掳C to 150掳C
Thermal Resistance	Thermal resistance (胃JA)	60掳C/W
ESD Rating	Electrostatic discharge rating	4kV
RoHS Compliance	Compliance with Restriction of Hazardous Substances Directive	Yes

Instructions for Use

1. Mounting:

   • Ensure that the PCB layout is designed to match the footprint of the SFC2815RM.
   • Use a reflow soldering process for surface mount components, following the recommended temperature profile.

2. Power Supply:

   • Connect the input voltage to the VCC pin and ground to the GND pin.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

3. Output Configuration:

   • Connect the load to the OUT pin.
   • Place a 100nF ceramic capacitor close to the OUT pin to stabilize the output.

4. Shutdown:

   • To shut down the device, connect the SHDN pin to GND.
   • To enable the device, connect the SHDN pin to VCC or leave it floating.

5. Thermal Management:

   • Ensure adequate heat dissipation by using a thermal pad on the PCB and a heatsink if necessary.
   • Monitor the junction temperature to ensure it does not exceed the maximum operating temperature.

6. Handling:

   • Handle the component with care to avoid ESD damage.
   • Store the component in a dry, cool environment to prevent moisture damage.

7. Testing:

   • After assembly, test the component under normal operating conditions to ensure proper functionality.
   • Verify the output voltage and current to ensure they meet the specified parameters.

(For reference only)