Details

---

BUY SFC2710KM https://www.utsource.net/itm/p/12594128.html

Below is the parameter table and instructions for the SFC2710KM:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Operating Voltage	Vcc	2.7	-	5.5	V
Operating Current (Typical)	Icc	-	1.5	3.0	mA
Output Voltage	Vo	3.3	-	3.3	V
Output Current (Max)	Io	-	-	500	mA
Quiescent Current	Iq	-	1.0	2.0	渭A
Dropout Voltage	Vdo	-	0.3	0.5	V
Thermal Shutdown Temperature	TSD	-	160	180	掳C
Storage Temperature Range	Tstg	-40	-	85	掳C
Operating Temperature Range	Topr	-40	-	85	掳C

Instructions

1. Power Supply Connection:

   • Connect the input voltage (Vcc) to the positive terminal of the power supply.
   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.

2. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the circuit.

3. Output Connection:

   • Connect the output (Vo) pin to the load or the circuit requiring a regulated 3.3V supply.
   • Ensure the load current does not exceed 500mA.

4. Capacitors:

   • Place a 1渭F ceramic capacitor between the input (Vcc) and ground (GND) as close as possible to the device.
   • Place a 1渭F ceramic capacitor between the output (Vo) and ground (GND) as close as possible to the device.

5. Thermal Considerations:

   • The device has built-in thermal shutdown protection, but ensure proper heat dissipation if operating at high currents or in high ambient temperatures.
   • Avoid exceeding the maximum junction temperature of 160掳C.

6. Storage and Handling:

   • Store the device in a dry environment with a temperature range of -40掳C to 85掳C.
   • Handle the device with care to avoid static damage.

7. Operating Temperature:

   • The device is designed to operate within a temperature range of -40掳C to 85掳C.

By following these instructions, you can ensure optimal performance and reliability of the SFC2710KM.

(For reference only)