Details

---

BUY MMPA546G https://www.utsource.net/itm/p/12594133.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.7		3.6	V
Output Current	IOUT	Continuous		200		mA
Quiescent Current	IQ	VDD = 3V		1.5		渭A
Input Offset Voltage	VOS	TA = 25掳C	-2	0	2	mV
Bandwidth	BW	Unity Gain		1.5		MHz
Slew Rate	SR			0.4		V/渭s
Common Mode Rejection Ratio	CMRR	f = 1kHz, RL = 10k惟	80			dB
Power Supply Rejection Ratio	PSRR	f = 1kHz, RL = 10k惟	90			dB

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the range of 1.7V to 3.6V for optimal operation.
2. Output Current: The device can provide a continuous output current up to 200mA. Avoid exceeding this limit to prevent damage.
3. Quiescent Current: Operates with a quiescent current of approximately 1.5渭A at 3V supply, which helps in low-power applications.
4. Input Offset Voltage: Keep input signals within the offset voltage range (-2mV to 2mV) for accurate signal processing.
5. Bandwidth and Slew Rate: For applications requiring high-speed signal processing, note the unity gain bandwidth of 1.5MHz and slew rate of 0.4V/渭s.
6. Common Mode and Power Supply Rejection Ratios: These parameters (CMRR and PSRR) are crucial for maintaining signal integrity in noisy environments.

For detailed specifications and further instructions, refer to the official datasheet provided by the manufacturer.

(For reference only)