Details

---

BUY TK10931VTL-G https://www.utsource.net/itm/p/12594151.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VDD	2.7	-	5.5	V
Standby Current	ISB	-	0.1	-	渭A
Operating Current	IOP	-	20	-	mA
Output Voltage	VOUT	-	3.3	-	V	Fixed
Dropout Voltage	VDROPOUT	-	0.2	-	V	@ IOUT = 100 mA
Load Regulation	-	-	0.5	-	%	@ IOUT = 10 mA to 100 mA
Line Regulation	-	-	0.05	-	%/V	@ VIN = 3.0 to 5.5 V
Ripple Rejection	-	60	70	80	dB	@ 1 kHz
Thermal Shutdown	TSD	-	145	-	掳C
Storage Temperature	TSTG	-40	-	85	掳C
Operating Temperature	TOPR	-40	-	85	掳C

Instructions for Use:

1. Supply Voltage (VDD): Ensure the supply voltage is within the range of 2.7 V to 5.5 V.
2. Standby Current (ISB): The device draws a typical standby current of 0.1 渭A.
3. Operating Current (IOP): The operating current should not exceed 20 mA.
4. Output Voltage (VOUT): The output voltage is fixed at 3.3 V.
5. Dropout Voltage (VDROPOUT): The dropout voltage is typically 0.2 V at an output current of 100 mA.
6. Load Regulation: The load regulation is 0.5% from 10 mA to 100 mA.
7. Line Regulation: The line regulation is 0.05% per volt from 3.0 V to 5.5 V.
8. Ripple Rejection: The ripple rejection is between 60 dB and 80 dB at 1 kHz.
9. Thermal Shutdown (TSD): The device will shut down if the temperature exceeds 145 掳C.
10. Storage Temperature (TSTG): Store the device in an environment with temperatures ranging from -40 掳C to 85 掳C.
11. Operating Temperature (TOPR): The device operates effectively within a temperature range of -40 掳C to 85 掳C.

Additional Notes:

• Ensure proper heat dissipation to prevent thermal shutdown.
• Use appropriate decoupling capacitors on the input and output to maintain stability and reduce noise.
• Check the datasheet for detailed application circuits and layout recommendations.

(For reference only)