Details

---

BUY TX-183S https://www.utsource.net/itm/p/12594183.html

Parameter	Description	Value
Part Number	Component Identifier	TX-183S
Type	Device Type	Surface Mount Transistor
Package	Package Type	SOT-23
Polarity	Polarity Type	NPN
VCEO	Collector-Emitter Voltage	45 V
VCBO	Collector-Base Voltage	50 V
VEBO	Emitter-Base Voltage	6 V
IC	Continuous Collector Current	200 mA
PD	Power Dissipation	350 mW
fT	Transition Frequency	300 MHz
hFE	DC Current Gain (min/max)	100/300
Storage Temp	Storage Temperature Range	-55掳C to +150掳C
Operating Temp	Operating Temperature Range	-55掳C to +150掳C
Mounting Type	Mounting Method	Surface Mount

Instructions for Use:

1. Handling:

   • Handle the TX-183S with care to avoid static discharge, which can damage the device.
   • Use appropriate ESD (Electrostatic Discharge) protection equipment when handling.

2. Soldering:

   • Preheat the PCB to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature setting between 260掳C and 300掳C.
   • Apply solder to the pads and not directly to the component leads.
   • Ensure that the soldering process is completed within 3 seconds to avoid thermal damage.

3. Mounting:

   • Place the TX-183S on the PCB with the correct orientation as indicated by the silkscreen.
   • Use a reflow soldering process if using automated assembly.
   • Ensure that the component is securely attached to the PCB without any shorts or open circuits.

4. Testing:

   • After soldering, visually inspect the component and connections for any defects.
   • Perform electrical tests to verify the functionality of the transistor.
   • Check the VCEO, VCBO, and VEBO ratings to ensure the component is operating within safe limits.

5. Storage:

   • Store the TX-183S in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use to protect against moisture and static.

6. Disposal:

   • Dispose of the TX-183S according to local environmental regulations.
   • Do not incinerate the component as it may release harmful substances.

(For reference only)