Details

---

BUY AD8099ACPZ https://www.utsource.net/itm/p/12594842.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.7		5.5	V
Supply Current	ICC	All channels active		10		mA
Input Voltage Range	VCM	Relative to ground	-0.5		VCC+0.5	V
Differential Input Voltage	VID	Maximum			±1.2	V
Output Voltage Swing	VOUT	RL = 1kΩ, C = 0pF	0.5		VCC-0.5	V
Large Signal Bandwidth	BWL	VOUT(p-p) = 2V		480		MHz
Slew Rate	SR			2600		V/μs
Noise Voltage Density	en	f = 1MHz		3.9		nV/√Hz
Input Bias Current	IB	VIN = GND	-50		50	nA
Input Offset Voltage	VOS	Initial	-2		2	mV
Common Mode Rejection Ratio	CMRR	f = 1kHz		76		dB
Power Down Mode Supply Current	IPPD	PD = Logic High		2		μA

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the range of 2.7V to 5.5V. The AD8099ACPZ operates optimally within this range.

2. Powering Up: Connect the power supply carefully to avoid any transient voltages that could damage the device.

3. Input Signals: Keep input signals within the specified input voltage range relative to ground. Avoid exceeding the differential input voltage limit to prevent distortion or damage.

4. Output Load: For optimal performance, ensure the output load resistance (RL) is around 1kΩ when no capacitive load is present.

5. Signal Bandwidth and Slew Rate: Utilize the large signal bandwidth and slew rate specifications to design circuits that can handle high-speed signals without distortion.

6. Noise Considerations: Be mindful of the noise voltage density, especially in applications requiring low noise performance.

7. Bias and Offset: Account for the input bias current and input offset voltage in your circuit design to minimize errors.

8. Common Mode Rejection: Leverage the common mode rejection ratio to mitigate common-mode interference in your application.

9. Power Down Mode: To reduce power consumption, use the power down mode by setting the PD pin to logic high. This significantly reduces the supply current.

For detailed application notes and further instructions, refer to the official datasheet provided by Analog Devices.

(For reference only)