Details

---

BUY 793-P-1C-S 001-24VDC https://www.utsource.net/itm/p/12594969.html

Below is the parameter table and instructions for the 793-P-1C-S 001-24VDC component.

Parameter Table

Parameter	Value	Unit
Model Number	793-P-1C-S 001-24VDC
Type	DC Power Supply
Input Voltage	24 V	VDC
Output Voltage	24 V	VDC
Output Current	1 A	A
Efficiency	85%	%
Operating Temperature	-20 to +70	掳C
Storage Temperature	-40 to +85	掳C
Dimensions (L x W x H)	50 x 30 x 20	mm
Weight	50	g
Protection	Overvoltage, Overcurrent, Short Circuit
Compliance	CE, RoHS

Instructions

1. Installation:

   • Ensure the power supply is installed in a well-ventilated area to prevent overheating.
   • Secure the power supply to a stable surface using the provided mounting holes.

2. Connection:

   • Connect the input terminals to a 24V DC power source.
   • Connect the output terminals to the load or device you wish to power.

3. Operation:

   • Turn on the power source to start supplying power to the connected load.
   • Monitor the temperature and ensure it remains within the operating range (-20 to +70掳C).

4. Maintenance:

   • Regularly inspect the connections for any signs of wear or damage.
   • Clean the power supply with a dry, soft cloth to remove dust and debris.

5. Safety Precautions:

   • Do not expose the power supply to water or other liquids.
   • Do not short circuit the output terminals.
   • Do not exceed the maximum input voltage.
   • Disconnect the power supply from the source before performing any maintenance or repairs.

6. Troubleshooting:

   • No Output: Check the input voltage and connections. Ensure the power source is functioning correctly.
   • Overheating: Ensure proper ventilation and check for any obstructions.
   • Output Fluctuations: Check for loose connections or faulty components in the load.

If you encounter any issues that cannot be resolved by the above troubleshooting steps, contact the manufacturer for further assistance.

(For reference only)