Details

---

BUY TSUM16AK-LF-1 https://www.utsource.net/itm/p/12594976.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Temperature	Toper	-40	-	85	°C
Storage Temperature	Tstg	-40	-	150	°C
Output Current	Iout	-	1.2	2.0	A
Quiescent Current	Iq	-	10	20	μA
Dropout Voltage	Vdo	-	150	300	mV
Load Regulation	ΔVL	-	2	5	mV
Line Regulation	ΔVL	-	2	5	mV
PSRR (10 Hz to 100 kHz)	PSRR	-	60	70	dB

Instructions for TSUM16AK-LF-1

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to the input pin.
   • Ensure the supply voltage is within the specified range (2.7V to 5.5V).

2. Ground Connection:

   • Connect the ground (GND) pin to the system ground.

3. Output Connection:

   • Connect the output pin to the load or circuit that requires regulated power.

4. Capacitors:

   • Place a 1μF ceramic capacitor between the input pin and ground as close as possible to the device.
   • Place a 1μF ceramic capacitor between the output pin and ground as close as possible to the device.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • The device can operate up to 85°C, but performance may degrade at higher temperatures.

6. Storage:

   • Store the device in a dry, cool environment to avoid damage from moisture and extreme temperatures.

7. Handling:

   • Handle with care to avoid static discharge, which can damage the device.
   • Use appropriate ESD protection measures when handling the device.

8. Testing:

   • Before finalizing the design, test the device under various operating conditions to ensure it meets the required specifications.

(For reference only)