Details

---

BUY irfb100b201 https://www.utsource.net/itm/p/12594980.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS			200	V	Maximum drain-to-source voltage
Gate-Source Voltage	VGS	-15		15	V	Maximum gate-to-source voltage
Continuous Drain Current	ID		3.7	7.4	A	Continuous drain current at TC = 25掳C
Pulse Drain Current	IDM		9.8	19.6	A	Pulse drain current (tP = 10 渭s, duty cycle = 1%)
RDS(on)			0.045	0.07	惟	On-resistance at VGS = 10V, ID = 3.7A
Input Capacitance	Ciss		1400		pF	Input capacitance
Output Capacitance	Coss		180		pF	Output capacitance
Reverse Transfer Capacitance	Crss		160		pF	Reverse transfer capacitance
Total Gate Charge	Qg		26		nC	Total gate charge
Gate Threshold Voltage	VGS(th)	1	2	4	V	Gate threshold voltage

Instructions for Use:

1. Installation and Handling:

   • Handle the IRFB100B201 with care to avoid damage to the leads or body.
   • Ensure proper grounding to prevent electrostatic discharge (ESD).

2. Mounting:

   • Mount the device on a suitable heat sink if continuous high current operation is expected.
   • Ensure good thermal contact between the device and the heat sink.

3. Electrical Connections:

   • Connect the source lead to the circuit ground.
   • Connect the gate to the control circuit ensuring that the maximum gate-source voltage ratings are not exceeded.
   • The drain should be connected to the load or switching circuitry.

4. Operation:

   • Operate within specified temperature and voltage limits to ensure reliable performance.
   • For pulse applications, ensure that the pulse width and duty cycle do not exceed the rated values.

5. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive environments.

6. Safety Precautions:

   • Always observe safety precautions when working with high voltages.
   • Do not exceed the maximum ratings listed in the parameter table to prevent damage or failure of the device.

(For reference only)