Details

---

BUY 884S02 https://www.utsource.net/itm/p/12595060.html

Parameter	Description	Value
Part Number		884S02
Type	Surface Mount Resistor
Resistance	Nominal Resistance	2.0 惟
Tolerance	Resistance Tolerance	卤5%
Power Rating	Maximum Power Dissipation	0.125 W
Operating Temp	Operating Temperature Range	-55掳C to +125掳C
Case Size	Standard Case Size	0805 (2012 Metric)
Termination	Termination Type	Solder
Compliance	RoHS Compliance	Yes
Packaging	Packaging Type	Tape & Reel

Instructions for Use

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

2. Mounting:

   • Place the resistor on the PCB (Printed Circuit Board) according to the design layout.
   • Ensure the correct orientation if specified by the circuit design.
   • Apply solder paste or flux to the pads before placing the resistor.
   • Use a reflow soldering process with appropriate temperature profiles to ensure proper soldering.

3. Soldering:

   • Preheat the board to 120掳C to 150掳C.
   • Ramp up the temperature at a rate of 2掳C to 3掳C per second.
   • Peak temperature should be between 230掳C and 260掳C for a duration of 10 to 20 seconds.
   • Cool down the board at a rate of 2掳C to 3掳C per second.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and alignment.
   • Use X-ray inspection if necessary to check for hidden defects.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from moisture and static.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle when possible to minimize environmental impact.

(For reference only)