Details
BUY X9314WS https://www.utsource.net/itm/p/12595062.html
| Parameter | Description |
|---|---|
| Part Number | X9314WS |
| Type | Voltage Regulator |
| Output Type | Fixed Output Voltage |
| Output Voltage | 5V (Fixed) |
| Input Voltage Range | 6.5V to 20V |
| Output Current | 1.5A (Max) |
| Operating Temperature Range | -40°C to +85°C |
| Package Type | TO-220 |
| ** dropout voltage** | 1.2V (Max at full load) |
| Quiescent Current | 5mA (Typical) |
| Load Regulation | ±1% |
| Line Regulation | ±0.5% |
| PSRR (Power Supply Rejection Ratio) | 70dB @ 1kHz |
| Storage Temperature Range | -65°C to +150°C |
Instructions for Use:
- Circuit Design: Ensure the input voltage is within the specified range (6.5V to 20V). The output voltage is fixed at 5V.
- Heat Dissipation: Given the maximum output current of 1.5A, consider using a heatsink if operating near the maximum current to manage heat effectively.
- Capacitor Requirements: Place a 10μF tantalum or electrolytic capacitor between the input and ground close to the regulator for stability. A 0.1μF ceramic capacitor on the output can improve transient response.
- PCB Layout: Keep the PCB traces from the input and output capacitors to the regulator as short as possible to minimize inductance.
- Mounting: Use appropriate mounting hardware for the TO-220 package. Ensure good thermal contact with any heatsink used.
- Testing: After assembly, test the regulator under various load conditions to ensure it meets performance specifications.
This table and these instructions provide essential information for integrating the X9314WS voltage regulator into your design.
(For reference only)View more about X9314WS on main site