Details

---

BUY MCP6004-I/P https://www.utsource.net/itm/p/12595068.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7		6.0	V
Input Offset Voltage	VOS	@ TA = +25掳C	-1	0	+1	mV
Input Bias Current	IB	@ TA = +25掳C, VCM = VDD/2		1		pA
Input Offset Current	IOS	@ TA = +25掳C	-5	0	+5	pA
Common-Mode Rejection Ratio	CMRR	@ TA = +25掳C, f = 60 Hz	88			dB
Power Supply Rejection Ratio	PSRR	@ TA = +25掳C, f = 1 kHz	94			dB
Slew Rate	SR	@ TA = +25掳C		0.4		V/渭s
Bandwidth	GBW	@ TA = +25掳C		1.3		MHz
Output Voltage Swing	VOUT	@ TA = +25掳C, RL = 10 k惟			VDD-1.5	V
Quiescent Current	IQ	@ TA = +25掳C		1.8		渭A

Instructions for Use

1. Power Supply: Connect the supply voltage (VDD) between 2.7V and 6.0V to pin 8 and ground (GND) to pin 4.

2. Input Signals:

   • Connect the inverting input (-) to pin 2.
   • Connect the non-inverting input (+) to pin 3.
   • Ensure that the common-mode input voltage does not exceed the supply voltage range.

3. Output:

   • The output is available on pin 1.
   • Ensure the load resistance (RL) is at least 10 k惟 to maintain specified output swing.

4. Temperature Considerations:

   • Specifications are typically given at +25掳C. For operation over a wider temperature range, refer to the datasheet for derating factors.

5. Stability and Compensation:

   • The MCP6004-I/P is unity-gain stable and internally compensated for ease of use in a wide variety of applications.

6. Handling Precautions:

   • This device is sensitive to electrostatic discharge (ESD). Handle with appropriate precautions to avoid damage.

7. Storage and Packaging:

   • Store in a dry environment and follow recommended storage practices as outlined in the datasheet.

For detailed specifications and application notes, refer to the official Microchip Technology datasheet for the MCP6004-I/P.

(For reference only)