Details

---

BUY PC714V https://www.utsource.net/itm/p/12595080.html

Parameter	Description	Value
Part Number		PC714V
Type	Voltage Regulator
Output Voltage	Fixed Output Voltage	14V
Input Voltage	Operating Input Voltage Range	18V to 40V
Output Current	Maximum Continuous Output Current	1A
Dropout Voltage	Dropout Voltage (Typical)	3.5V
Quiescent Current	Quiescent Current (Typical)	5mA
Operating Temperature	Operating Temperature Range	-40掳C to +125掳C
Storage Temperature	Storage Temperature Range	-65掳C to +150掳C
Package	Package Type	TO-220
Polarity	Polarity	Positive
Mounting Type	Mounting Type	Through-Hole

Instructions for Use

1. Circuit Design:

   • Ensure that the input voltage is within the specified range (18V to 40V).
   • Connect the input voltage to the "IN" pin and the output voltage to the "OUT" pin.
   • Ground the "GND" pin.

2. Heat Dissipation:

   • For high current applications, use a heatsink to dissipate heat effectively.
   • The thermal resistance from junction to ambient (R胃JA) is typically 65掳C/W without a heatsink.

3. Capacitors:

   • Place a 10渭F electrolytic capacitor between the input and ground to filter out noise.
   • Place a 10渭F electrolytic capacitor between the output and ground to stabilize the output voltage.

4. PCB Layout:

   • Keep the leads short to minimize parasitic inductance.
   • Ensure good thermal management by using wide traces or copper pours for heat dissipation.

5. Safety Precautions:

   • Do not exceed the maximum input voltage to avoid damaging the regulator.
   • Ensure proper ventilation if the regulator is operating at high temperatures.
   • Use appropriate fuses to protect against overcurrent conditions.

6. Testing:

   • Measure the output voltage with a multimeter to ensure it is stable at 14V.
   • Check the temperature of the regulator during operation to ensure it does not exceed the maximum operating temperature.

By following these instructions, you can ensure reliable and efficient operation of the PC714V voltage regulator.

(For reference only)