Details

---

BUY MC10H350M https://www.utsource.net/itm/p/12595102.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		5.5	V
Output Current	Iout	Continuous		300		mA
Quiescent Current	Iq	Vout = 0V		1		渭A
Dropout Voltage	Vdo	Iout = 300mA		0.4		V
Load Regulation		Iout: 0 to 300mA		0.2		%
Line Regulation		Vcc: 2.7 to 5.5V		0.2		%
Ripple Rejection		1kHz		60		dB
Operating Temperature	Temp	Junction	-40		125	掳C

Instructions for Use:

1. Power Supply Connection:

   • Connect the input of the MC10H350M to a power supply within the specified voltage range (2.7V to 5.5V).

2. Output Configuration:

   • Ensure the load connected to the output does not exceed the maximum continuous output current of 300mA.

3. Thermal Considerations:

   • Ensure adequate heat dissipation, especially when operating at higher currents and temperatures up to 125掳C.

4. Capacitor Requirements:

   • Place an input capacitor (typically 0.1渭F) close to the input pin to stabilize the regulator.
   • An output capacitor (typically 1渭F) is recommended to improve transient response and stability.

5. PCB Layout:

   • Keep the layout compact to minimize noise and interference. Ensure good grounding practices.

6. Handling Precautions:

   • Handle with care to avoid damage from electrostatic discharge (ESD). Use proper ESD protection measures.

7. Testing:

   • Before finalizing the design, test the regulator under various load conditions to ensure it meets performance specifications.

(For reference only)