Details

---

BUY HMC439QS16G https://www.utsource.net/itm/p/12595107.html

Parameter	Description	Value	Unit
Frequency Range	Operating frequency range	6 to 16	GHz
Gain	Small signal gain	20	dB
Noise Figure	Typical noise figure	3.5	dB
P1dB Compression	Output power at 1 dB compression	+24.5	dBm
PSAT	Saturation power	+27.5	dBm
Input VSWR	Voltage Standing Wave Ratio (Input)	2.0:1
Output VSWR	Voltage Standing Wave Ratio (Output)	2.0:1
Supply Voltage	Operating supply voltage	5	V
Supply Current	Operating supply current	190	mA
Package Type	Surface mount package	QSOP-16
Operating Temperature	Temperature range for operation	-40 to +85	掳C

Instructions for HMC439QS16G

1. Power Supply Connection:

   • Connect the supply voltage of 5V to the designated pin on the QSOP-16 package.
   • Ensure that the supply current can support up to 190mA.

2. Biasing and Grounding:

   • Properly ground all pins as indicated in the datasheet to avoid signal degradation.
   • Use bypass capacitors near the power supply pins to ensure stable operation.

3. Frequency Operation:

   • The amplifier is optimized for frequencies between 6GHz and 16GHz. Ensure your application falls within this range for optimal performance.

4. Input/Output Connections:

   • Match the input and output impedances to 50 ohms to minimize VSWR and maximize power transfer.
   • Use appropriate RF connectors and transmission lines to maintain signal integrity.

5. Handling Precautions:

   • Handle the device with care, avoiding electrostatic discharge (ESD) which can damage the sensitive components.
   • Follow proper soldering techniques when mounting the QSOP-16 package to prevent thermal damage.

6. Testing:

   • Before full integration into a system, test the amplifier using standard RF testing equipment to verify gain, noise figure, and output power levels.
   • Ensure that the operating temperature does not exceed +85掳C or drop below -40掳C during testing.

(For reference only)