Details

---

BUY RCL10487 https://www.utsource.net/itm/p/12595108.html

Parameter	Description	Value
Part Number	Component Identifier	RCL10487
Type	Component Classification	Resistor
Resistance	Opposition to Current Flow	100 Ohms
Tolerance	Variation from Nominal Value	卤5%
Power Rating	Maximum Power Dissipation	0.25 Watts
Temperature Coefficient	Change in Resistance per Degree Celsius	100 ppm/掳C
Operating Temperature	Range of Temperatures for Operation	-55掳C to 125掳C
Package/Case	Physical Dimensions and Shape	0805

Instructions:

1. Installation: Ensure the resistor is placed correctly on the PCB, aligning with the designated footprint. For manual soldering, preheat the board to reduce thermal shock.
2. Soldering: Use a temperature-controlled soldering iron set no higher than 350掳C to avoid damaging the component. Ensure good wetting of the solder joints without excess solder.
3. Inspection: After soldering, inspect the joints for proper connection and absence of shorts or bridges. Verify orientation if applicable.
4. Testing: Before powering the circuit, measure the resistance to ensure it matches the specified value within tolerance.
5. Handling: Handle with care to prevent damage from electrostatic discharge (ESD) and mechanical stress. Store in a dry environment when not in use.

(For reference only)