Details

---

BUY CA3080EZ https://www.utsource.net/itm/p/12595499.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	10	-	40	V
Input Offset Voltage	Vos	-5	0	5	mV
Input Bias Current	Iib	-1	0	1	渭A
Input Offset Current	Iios	-0.1	0	0.1	渭A
Large Signal Voltage Gain	Avo	-	10,000	-	V/mV
Slew Rate	SR	100	-	300	V/渭s
Output Voltage Swing	Vo	-Vcc + 1.5	-	Vcc - 1.5	V
Bandwidth (Unity Gain)	fT	1	-	10	MHz
Power Consumption	Pd	-	150	-	mW

Instructions for Using CA3080EZ:

1. Supply Voltage:

   • The CA3080EZ can operate with a supply voltage ranging from 10V to 40V. Ensure that the supply voltage is within this range to avoid damage to the device.

2. Input Bias and Offset Currents:

   • The input bias current and input offset current are very low, typically around 0 渭A. This makes the CA3080EZ suitable for high-impedance applications.

3. Large Signal Voltage Gain:

   • The large signal voltage gain is typically 10,000 V/mV. This high gain allows for significant amplification of input signals.

4. Slew Rate:

   • The slew rate ranges from 100 V/渭s to 300 V/渭s. This parameter is crucial for ensuring that the amplifier can handle fast-changing signals without distortion.

5. Output Voltage Swing:

   • The output voltage swing is limited by the supply voltage, typically ranging from -Vcc + 1.5V to Vcc - 1.5V. Ensure that the load connected to the output does not exceed these limits.

6. Bandwidth:

   • The unity gain bandwidth is between 1 MHz and 10 MHz. This wide bandwidth makes the CA3080EZ suitable for high-frequency applications.

7. Power Consumption:

   • The typical power consumption is 150 mW. Ensure that the power supply can handle this load and that adequate heat dissipation is provided if necessary.

8. Handling Precautions:

   • Handle the CA3080EZ with care to avoid static discharge, which can damage the device.
   • Ensure that all connections are secure and properly soldered to prevent intermittent operation.

9. Application Notes:

   • The CA3080EZ is often used in transconductance amplifiers, where the output current is proportional to the input voltage.
   • For detailed circuit design and application examples, refer to the datasheet and application notes provided by the manufacturer.

(For reference only)