Details

---

BUY P51XAG37KBA https://www.utsource.net/itm/p/12596155.html

Parameter	Value
Component Type	Power Transistor
Part Number	P51XAG37KBA
Package Type	TO-247
Polarity	NPN
Collector-Emitter Voltage (Vce)	600 V
Emitter-Base Voltage (Veb)	7 V
Collector Current (Ic)	15 A
Power Dissipation (Ptot)	150 W
Hfe (Min)	10
Hfe (Max)	50
Operating Temperature Range	-55掳C to 150掳C
Storage Temperature Range	-65掳C to 150掳C
Thermal Resistance (Rth,j-c)	0.8 K/W
Mounting Type	Through-Hole

Instructions for Use:

1. Handling Precautions:

   • Avoid touching the leads or the semiconductor surface directly.
   • Use proper ESD (Electrostatic Discharge) protection when handling the component.

2. Soldering:

   • Preheat the PCB to 100掳C to 120掳C before soldering.
   • Soldering temperature should not exceed 350掳C.
   • Soldering time should be kept under 10 seconds per joint.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Apply a thin layer of thermal compound between the heat sink and the transistor for optimal heat dissipation.
   • Tighten the mounting screws to the recommended torque (typically 5-7 Nm).

4. Operational Considerations:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure adequate cooling to maintain the operating temperature within the specified range.
   • Use appropriate circuit protection devices (e.g., fuses, diodes) to protect against overcurrent and overvoltage conditions.

5. Testing:

   • Before applying power, verify all connections and ensure the circuit is correctly assembled.
   • Use a multimeter to check for short circuits and open circuits.
   • Gradually apply power and monitor the temperature and performance of the transistor.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

(For reference only)