Details

---

BUY TL084CPWG4 https://www.utsource.net/itm/p/12596159.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	卤4.5	-	卤18	V
Input Offset Voltage	VIO	-	-	2	5	mV
Input Bias Current	IB	-	-	60	120	nA
Input Offset Current	IO	-	-	10	30	nA
Input Voltage Range	VI	-	VEE + 1.5	-	VCC - 1.5	V
Output Short-Circuit Duration	tSC	-	-	-	Continuous	-
Slew Rate	SR	-	-	13	-	V/渭s
Large Signal Voltage Gain	AV	VCC = 卤15V, f = 1kHz	-	10000	-	V/V
Bandwidth (Unity Gain)	fT	-	-	3	-	MHz
Power Consumption	PD	Per amplifier	-	-	1.7	mW

Instructions for Use:

1. Supply Voltage:

   • Operate within the specified supply voltage range to avoid damage or erratic behavior.
   • Ensure the supply voltages are symmetrical (e.g., 卤15V).

2. Input Signals:

   • Keep input signals within the input voltage range to prevent clipping or distortion.
   • Avoid exceeding the maximum input voltage limits to prevent damage.

3. Output Load:

   • The output can drive loads down to 2k惟. Ensure the load resistance is within this range for optimal performance.
   • Be cautious with short-circuiting the output; while it is designed to handle short circuits, prolonged exposure can lead to overheating.

4. Slew Rate:

   • The slew rate limits the rate at which the output voltage can change. This is important for high-frequency applications.
   • For signals with fast rise/fall times, ensure the slew rate is sufficient to avoid distortion.

5. Power Dissipation:

   • Monitor power dissipation to avoid overheating. Use appropriate heat sinks if necessary, especially in high-power applications.

6. Biasing:

   • Properly bias the inputs to ensure stable operation. Use feedback networks to maintain stability and reduce noise.

7. Storage and Handling:

   • Store in a dry, cool environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the internal components.

8. Testing:

   • Before integrating into a circuit, test the device on a breadboard or evaluation board to ensure it meets the required specifications.
   • Use appropriate test equipment and follow safety guidelines to avoid injury or damage.

(For reference only)