Details

---

BUY NJM4580M-TE3 https://www.utsource.net/itm/p/12596247.html

Below is the parameter table and instructions for the NJM4580M-TE3:

Parameter Table: NJM4580M-TE3

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	Vcc	2.7	-	18	V
Quiescent Current	IQ	-	3.0	-	mA	Vcc = 5V, No Load
Output Voltage Swing	Vosw	0.1	-	1.5	V	Vcc = 5V, RL = 1kΩ
Slew Rate	SR	-	1.0	-	V/μs	Vcc = 5V, RL = 1kΩ
Input Offset Voltage	Vio	-	2.0	-	mV	Vcc = 5V
Input Bias Current	Iib	-	50	-	nA	Vcc = 5V
Common Mode Rejection Ratio	CMRR	-	80	-	dB	Vcc = 5V, f = 1kHz
Power Supply Rejection Ratio	PSRR	-	80	-	dB	Vcc = 5V, f = 1kHz
Operating Temperature Range	Ta	-40	-	85	°C
Storage Temperature Range	Tstg	-65	-	150	°C

Instructions:

1. Power Supply:

   • The NJM4580M-TE3 can operate with a supply voltage ranging from 2.7V to 18V. Ensure that the power supply is stable and within this range to avoid damage to the device.

2. Biasing:

   • Proper biasing is essential for optimal performance. Use appropriate resistors to set the bias point for the inputs and outputs.

3. Decoupling Capacitors:

   • Place decoupling capacitors (typically 0.1μF and 10μF) close to the power supply pins to filter out noise and ensure stable operation.

4. Output Load:

   • The output voltage swing is limited by the supply voltage. Ensure that the load resistance (RL) is appropriate for the desired output level.

5. Temperature Considerations:

   • The operating temperature range is -40°C to 85°C. Avoid exposing the device to temperatures outside this range to prevent damage or reduced performance.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components. Use proper ESD protection when handling the device.

7. Mounting:

   • Ensure that the device is mounted on a suitable PCB with adequate heat dissipation if high power applications are involved.

8. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications and performance criteria.

By following these instructions and parameters, you can ensure that the NJM4580M-TE3 operates reliably and efficiently in your application.

(For reference only)