Details

---

BUY G5V-2-H1-12V https://www.utsource.net/itm/p/12596250.html

Parameter	Value
Product Series	G5V-2
Model	G5V-2-H1-12V
Type	SPDT Relay
Coil Voltage	12 VDC
Coil Power	1.2 W
Coil Resistance	100 惟
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A, 250VAC
Insulation Resistance	100 M惟 min. at 500 VDC
Dielectric Strength	1500 VAC for 1 minute
Operating Temperature	-40 to +85 掳C
Storage Temperature	-40 to +85 掳C
Operating Humidity	5 to 95% RH (non-condensing)
Terminal Type	Solder Lug
Weight	6 g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a suitable surface that allows for adequate heat dissipation.
   • Use the solder lug terminals to connect the relay to your circuit.

2. Coil Connection:

   • Connect the coil terminals to a 12V DC power supply ensuring correct polarity for reliable operation.

3. Contact Usage:

   • The common (COM) terminal can be switched between normally open (NO) and normally closed (NC) contacts.
   • Do not exceed the contact rating of 10A at 250VAC to prevent damage.

4. Environmental Considerations:

   • Operate within the specified temperature and humidity ranges to ensure reliable performance.
   • Avoid environments where condensation may occur.

5. Inspection and Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay as necessary using a soft, dry cloth. Avoid using solvents that could damage the relay.

6. Handling Precautions:

   • Handle with care to avoid mechanical shock which could affect the internal components.
   • Follow all safety guidelines when working with electrical circuits.

(For reference only)