Details

---

BUY PC3H4J00000F https://www.utsource.net/itm/p/12596256.html

Parameter	Description
Part Number	PC3H4J00000F
Type	DDR3 SDRAM
Capacity	4 GB
Module Type	UDIMM
Memory Organization	512 M x 8
Data Rate	1600 MT/s (PC3-12800)
Voltage	1.5V
CAS Latency (CL)	11
RAS# to CAS# Delay (tRCD)	15
Row Precharge Time (tRP)	15
Row Active Time (tRAS)	32
Refresh Cycle Time (tRFC)	64
Operating Temperature	0掳C to 85掳C
Storage Temperature	-40掳C to 85掳C
RoHS Compliance	Yes
ECC Support	No

Instructions for Use:

1. Installation:

   • Ensure the system is powered off before installing the module.
   • Align the module with the slot, ensuring the notch on the module matches the key on the slot.
   • Gently press down on both ends of the module until the retention clips snap into place.

2. Configuration:

   • Check the system BIOS/UEFI settings to ensure the memory is recognized and configured correctly.
   • Verify that the memory speed and timings are set to the specifications provided above.

3. Compatibility:

   • This module is compatible with systems that support DDR3-1600 memory.
   • Ensure the system motherboard has a compatible DIMM slot.

4. Maintenance:

   • Periodically clean the contacts of the module with a soft, dry cloth or compressed air.
   • Avoid touching the gold contacts to prevent corrosion or damage.

5. Troubleshooting:

   • If the system does not recognize the memory, check the seating of the module and ensure it is securely installed.
   • Verify that the system BIOS/UEFI is updated to the latest version for optimal compatibility.
   • If issues persist, consult the system manual or contact technical support.

(For reference only)