Details

---

BUY M80C39 https://www.utsource.net/itm/p/12596279.html

Parameter	Description	Value/Range
Device Type	8-bit Microcontroller	M80C39
Package Type	DIP-40, PLCC-44
Operating Voltage	Vcc	5V 卤 10%
Clock Frequency	Internal/External Clock Options	0 - 12 MHz
Program Memory	ROM	4KB
Data Memory	RAM	256 Bytes
I/O Ports	Programmable I/O Ports	32
Timers	On-chip Timer	2
Interrupts	Maskable Interrupts	5
Serial Interface	UART	Yes
Power Consumption	Active Mode	150 mA (typical)
Operating Temp.	Industrial Temperature Range	-40掳C to +85掳C

Instructions for Use:

1. Power Supply:

   • Ensure the power supply voltage is within the specified range of 5V 卤 10%.

2. Clock Configuration:

   • The device supports both internal and external clock sources. For an external clock, connect a crystal or oscillator between the XTAL1 and XTAL2 pins.

3. Reset Circuit:

   • A reset circuit must be connected to the RST pin to initialize the microcontroller properly. Ensure the reset pulse width is sufficient for reliable operation.

4. Program Development:

   • Write your program using an assembler or high-level language compatible with the M80C39 architecture.
   • Load the program into the ROM using a programmer or in-circuit programming method if supported.

5. I/O Port Configuration:

   • Configure the I/O ports as inputs or outputs in software during initialization. Each port can be individually configured.

6. Interrupt Handling:

   • Set up interrupt vectors and enable interrupts in the program to handle asynchronous events.

7. Serial Communication:

   • Initialize the UART for serial communication by configuring baud rate, data bits, parity, and stop bits.

8. Power Management:

   • Implement power-saving modes by disabling unused peripherals and setting the microcontroller to low-power states when not actively processing.

9. Testing and Debugging:

   • Use an in-circuit emulator (ICE) or on-chip debugging tools for testing and debugging your application.

10. Environmental Considerations:

    • Operate the device within the specified temperature range to ensure reliability and longevity.

(For reference only)