Details

---

BUY MBI6024GP https://www.utsource.net/itm/p/12596374.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	4.5	5.0	5.5	V
Output Current per Channel	IO	Continuous	-	150	-	mA
Maximum Power Dissipation	PD	Ta = 25掳C	-	1500	-	mW
Operating Temperature Range	TOPR	-	-40	85	125	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C
Input Voltage Range	VIN	-	0	-	5.5	V
Input Leakage Current	IIL	VIN = 0V, VDD = 5V	-	1	-	渭A
Output Low Voltage	VOL	IO = 150mA, VDD = 5V	-	0.5	-	V
Output High Voltage	VOH	IO = -150mA, VDD = 5V	-	4.5	-	V
Propagation Delay Time	tpd	VIN = 2.5V, VDD = 5V	-	30	-	ns
Power-On Reset Time	tPOR	VDD rising from 0 to 5V	-	100	-	渭s

Instructions for Using MBI6024GP:

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Output Current per Channel (IO):

   • The maximum continuous output current per channel is 150mA.
   • Do not exceed this limit to prevent damage to the device.

3. Maximum Power Dissipation (PD):

   • The device can dissipate up to 1500mW at room temperature (25掳C).
   • Ensure adequate heat dissipation if operating at higher temperatures or with higher power loads.

4. Operating Temperature Range (TOPR):

   • The device operates reliably between -40掳C and 85掳C.
   • Extended operation at temperatures above 85掳C is possible but may reduce lifespan.

5. Storage Temperature Range (TSTG):

   • Store the device between -65掳C and 150掳C to ensure long-term reliability.

6. Input Voltage Range (VIN):

   • The input voltage should be within 0V to 5.5V to avoid damage to the inputs.

7. Input Leakage Current (IIL):

   • The input leakage current is typically 1渭A at VIN = 0V and VDD = 5V.
   • Ensure that any pull-up or pull-down resistors are appropriately sized to handle this leakage.

8. Output Low Voltage (VOL):

   • When sourcing 150mA, the output low voltage is typically 0.5V.
   • This value helps in ensuring proper logic levels in downstream circuits.

9. Output High Voltage (VOH):

   • When sinking 150mA, the output high voltage is typically 4.5V.
   • This ensures a strong logic high signal.

10. Propagation Delay Time (tpd):

    • The propagation delay time is typically 30ns when VIN = 2.5V and VDD = 5V.
    • This parameter is crucial for timing-sensitive applications.

11. Power-On Reset Time (tPOR):

    • The power-on reset time is typically 100渭s as VDD rises from 0V to 5V.
    • Ensure that the system waits at least this duration before starting operations to avoid undefined states.

By following these parameters and instructions, you can ensure reliable and efficient operation of the MBI6024GP.

(For reference only)