Details

---

BUY RTC72423A https://www.utsource.net/itm/p/12596392.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	1.6	-	5.5	V
Operating Temperature	Toper		-40	-	85	掳C
Storage Temperature	Tstg		-55	-	125	掳C
Clock Frequency	fclk	Nominal	32.768	-	32.768	kHz
Current Consumption	ICC	Vcc = 3V, fclk = 32.768kHz	0.25	0.5	1.0	渭A
Output High Level	VOH	IOL = -0.4mA	2.4	-	Vcc-0.1	V
Output Low Level	VOL	IOH = 0.4mA	0.4	-	0.9	V
Input Leakage Current	IIK	VI = 0 to Vcc	-1	-	1	渭A
Output Drive Current	IOH	VOL = 0.4V	-0.4	-	-	mA
Output Sink Current	IOL	VOH = Vcc-0.1V	0.4	-	-	mA

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 1.6V to 5.5V.
   • Use a stable power source to avoid fluctuations that can affect the operation of the RTC72423A.

2. Temperature Considerations:

   • The operating temperature range is from -40掳C to 85掳C.
   • Store the device in temperatures ranging from -55掳C to 125掳C to ensure long-term reliability.

3. Clock Frequency:

   • The nominal clock frequency is 32.768 kHz. Use a 32.768 kHz crystal oscillator for accurate timekeeping.

4. Current Consumption:

   • The typical current consumption is 0.5 渭A at 3V and 32.768 kHz. Ensure the power supply can handle this load.

5. Output Levels:

   • The output high level (VOH) should be at least 2.4V when sourcing 0.4 mA.
   • The output low level (VOL) should not exceed 0.9V when sinking 0.4 mA.

6. Input and Output Currents:

   • The input leakage current (IIK) should be within 卤1 渭A.
   • The output drive current (IOH) should be able to sink up to 0.4 mA.
   • The output sink current (IOL) should be able to source up to 0.4 mA.

7. Layout and PCB Design:

   • Place the RTC72423A close to the crystal oscillator to minimize trace lengths and reduce noise.
   • Use decoupling capacitors (typically 0.1 渭F) near the Vcc pin to filter out any power supply noise.

8. Programming and Configuration:

   • Refer to the datasheet for specific register configurations and programming sequences.
   • Use appropriate software or hardware interfaces to set and read the time and date values.

9. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place to prevent moisture-related issues.

For detailed information and specific applications, refer to the full datasheet provided by the manufacturer.

(For reference only)